3D Display Modes - Siemens ARCADIS Orbic Quick Manual

3D option

3D display modes

From the MPR standard display you can
switch to the following display modes for the
scanned volume:
❏
MPR Thick
Images with adjustable slice thickness
❏
SSD (Shaded Surface Display)
Three-dimensional surface reconstruction
✧
First, click the segment for which you
want to change the output type.
Setting MPR Thick
✧
Using the left mouse button, click the
MPR button on the Type subtask card (1).
➭
The display mode is changed.
✧
To set a different slice thickness, click the
MPR button (1) with the right mouse but-
ton.
✧
Enter the required slice thickness in the
dialog displayed and confirm with OK (2).
Setting SSD
Click the SSD button on the Type subtask
✧
card (3).
➭
The SSD reconstruction is performed in
the selected reference segment (4).
81