Siemens ARCADIS Orbic Quick Manual page 77

3D option
Generating radial images
Click on the Radial Ranges button (1).
✧
In the Radial Ranges dialog, enter the
✧
image thickness, angle between images
and number of images (2).
Click Start.
✧
➭
The new range is shown in the output
segment.
Generating curved cuts
Click the Curved Mode button (3).
✧
✧
Using the mouse, draw the required cut
line in the reference image (4).
✧
End the line with a double click.
➭
The reconstructed slice image is shown in
the output segment (5).
77