3D option
Moving a cut plane
✧
Use the dog ears to scroll forward or back-
ward slice by slice in a segment (1).
✧
Move a reference line with the mouse to
display the new slice position in the rele-
vant segment (2).
Rotating a cut plane
Activate Free Mode by clicking the but-
✧
ton (3).
✧
Rotate a reference line to display the new
cut direction in the relevant segment (4).
Deselect Free Mode to freeze the angle (3).
✧
Using Ortho Sync
This function can be used to create orthogo-
nal cuts for an arbitrary (reference) view.
✧
Create the required reference view in a
reference segment by moving/rotating
the cut plane.
Click the Ortho Sync button on the
✧
Orientation subtask card (5).
73