3D option
Changing the SSD threshold
If necessary, the preset threshold values for
the surface reconstruction can be changed
individually.
Click the SSD button (1) with the right
✧
mouse button.
The display of the 3D card is reset for opti-
➭
mizing the threshold values:
(2) Reference segments in MPR mode (areas
within threshold values highlighted)
(3) SSD Definition dialog
(4) Output segment with SSD display based
on current threshold values
✧
Change the threshold values with the
slider or enter new values in the input
fields.
The click the High Quality button (5).
✧
Setting the SSD light source
You can change the light source to achieve a
better display of the surface condition of ana-
tomical structures.
Click the Light Source Definition - SSD
✧
button (6).
✧
Select one of the presets or set the
required values with the sliders (7).
Confirm with OK.
✧
83