Taking Care GO Setup & User Manual page 20

SEC TI O N T H RE E
Testing your Go
alarm pendant
You will need to go through the system check for your GO
alarm pendant. The system check informs you of the battery
level, cellular network strength and checks that your GO
alarm pendant can obtain GPS coordinates to be able to log
your location.
You should perform a full system check in different areas
of your home to ensure that the network coverage is
strong enough if you need to send an alert for help.
Always ensure your GO alarm pendant has adequate
battery before going out. A system check should also be
completed at the place of the charger so that you know
cloud updates can take place here.
•
Press the single button on either
side of your GO alarm pendant to
begin the system check. Do not
press both together as this will
send a call for help.
•
A chime will play, and your GO
alarm pendant will show a blue
status light – this means the
system check has started.
TA KI NG CA R E
3.1 TEST I NG B AT TE RY LE V E L
Your GO alarm pendant will announce the battery level first.
Alongside a status light a voice message will tell you if the
battery level is:
STATUS LIGHT "My battery ... "
GREEN "... is excellent"
BLUE "... is good"
"... low battery, please place me on
AMBER
the charger today"
"... is critically low please place me on
RED
the charger now"
SECTION THREE
38