Connection - Siemens Healthineers MAGNETOM Sempra Operator's Manual

4 Coils
66
(1) Coil socket
(2) Plug for coil socket on the patient table
The Flex Coil Interface can be connected to coil sockets 1 or 2 on the
patient table.
4.12.2

Connection

1 Connect the coil connector of the Flex Coil Interface to a suitable
coil socket on the patient table.
2 Ensure that the cable of the Flex Coil Interface does not hang over
the sides of the patient table.
3 Connect the coil plug of the coil used to the coil socket of the Flex
Coil Interface.
4 Secure the cable of the Flex Coil Interface with the cable holders.
Coils | Operator Manual
Print No. M4-08006G.623.01.02.02