Nat Associations - Netopia 4752 2A4NA Administration Manual

11-26 Administration Guide

NAT Associations

Configuration of map and server lists alone is not sufficient to enable NAT for a WAN connection because map
and server lists must be linked to a profile that controls the WAN interface. This can be a Connection Profile, a
WAN Ethernet interface, a default profile, or a default answer profile. Once you have configured your map and
server lists, you may want to reassign them to different interface-controlling profiles, for example, Connection
Profiles. To permit easy access to this IP Setup functionality, you can use the NAT Associations screen.
You access the NAT Associations screen from the Network Address Translation screen.
Main
Menu
Select NAT Associations and press Return. The NAT Associations screen appears.
Profile/Interface Name-------------Nat?-Map List Name-----Server List Name
Default Answer Profile
Easy Setup Profile
Profile 01
Profile 02
Profile 03
You can toggle NAT? On or Off for each Profile/Interface name. You do this by navigating to the NAT? field
associated with each profile using the arrow keys. Toggle NAT on or off by using the Tab key.
You can reassign any of your map lists or server lists to any of the Profile/Interfaces. You do this by
navigating to the Map List Name or Server List Name field associated with each profile using the arrow
System
Configuration
NAT Associations
On
On
On
On
On
IP
Setup Associations
my_first_map my_servers
Easy-PAT my_servers
my_second_map my_servers
my_first_map my_server_list
<<None>> <<None>>
NAT