How To Configure Wpa Advanced Security - NETGEAR WAG511 User Manual

User's Manual for the NETGEAR Dual Band Wireless PC Card 32-bit CardBus WAG511

How to Configure WPA Advanced Security

Note The EAP-TLS option requires that a certificate from a Certificate Authority be installed on
:
the PC first. When using the EAP-PEAP option, a certificate on the PC can be dynamically
downloaded to the client. If your are using the EAP-TLS option, be sure the certificate is installed
on the PC before completing this procedure. For assistance with installing a certificate on your PC,
consult your network administrator, Windows help, or the documentation for your PC.
Follow the steps below to configure WPA Advanced Security.
1. Run the WAG511 Configuration Utility.
Make sure the WAG511 software is installed and the WAG511 is fully inserted in your PC.
a.
Open the configuration utility by clicking on the WAG511 icon
b.
desktop or in the system tray. The Settings tab page opens.
2. Configure the Network Name (SSID) settings.
Enter the SSID. This is also called the Wireless Network Name.
Tip: Click the Networks tab to view a list of the available wireless networks and their SSIDs.
Configure the WPA Advanced settings.
3.
Under Security, select the Advanced radio button then click Advanced Security.
a.
Figure 5-3: Advanced Security Settings screen
5-8
202-10041-01 September 2004
on the Windows
Wireless Security Configuration