NETGEAR WAG511 User Manual page 17

User's Manual for the NETGEAR Dual Band Wireless PC Card 32-bit CardBus WAG511
Table 2-1. A Road Map for How to Get There From Here
If I Want To? What's Needed?
Connect to the
1. An active Internet
Internet over my
connection like those from
wireless
cable or DSL service
network.
providers.
2. A wireless network
connected to an Internet
service through a router as
illustrated in
to an Access Point in
Infrastructure Mode" on
page
3. TCP/IP Internet networking
software installed and
configured on my notebook
PC according to the
requirements of the
Internet service provider.
4. A browser like Internet
Explorer or Netscape
Navigator.
Introduction
What Do I Do?
1. Activate my
2. Open an Internet
"Connecting
4-4.
202-10041-01 September 2004
How Do I?
To configure your WAG511 in
Infrastructure Mode, see
wireless link and
Installation Instructions" on
verify my network
page
connection.
for your version of Windows.
browser such as
For assistance with configuring
Internet Explorer
the TCP/IP Internet software on
or Netscape
a PC, see
Navigator.
Computers for TCP/IP
Networking" on page C-1
to the PC Networking Tutorial on
the NETGEAR Dual Band
Wireless PC Card 32-bit
CardBus WAG511 Resource CD
and the Help information
provided in the Windows system
you are using.
.
"Basic
3-4, and locate the section
"Preparing Your
or refer
2-5