NETGEAR WAG511 User Manual page 19

User's Manual for the NETGEAR Dual Band Wireless PC Card 32-bit CardBus WAG511
Table 2-1. A Road Map for How to Get There From Here
If I Want To? What's Needed?
Use printers in
1. The notebook computer I
a combined
am using to connect to the
wireless network needs to
wireless and
be configured with the
wired
Windows Client and File
network.
and Print Sharing.
2. The notebook computer I
am using to connect to the
wireless network needs to
be configured with the
same Windows Workgroup
or Domain settings as the
other Windows computers
in the combined wireless
and wired network.
3. Any Windows networking
security access rights such
as login user name/
password that have been
assigned in the Windows
network must be provided
when Windows prompts for
such information.
4. If so-called Windows 'peer'
networking is being used,
the printer needs to be
enabled for sharing.
Introduction
What Do I Do?
1. Use the Windows
Printers and Fax
features to locate
available printers
in the combined
wireless and wired
network.
2. Use the Windows
Add a Printer
wizard to add
access to a
network printer
from the notebook
PC you are using
to wirelessly
connect to the
network.
3. From the File
menu of an
application such
as Microsoft Word,
use the Print
Setup feature to
direct your print
output to the
printer in the
network.
202-10041-01 September 2004
How Do I?
Windows Domain settings are
usually managed by corporate
computer support groups.
Windows Workgroup settings
are commonly managed by
individuals who want to set up
small networks in their homes, or
small offices.
For assistance with setting up
Windows networking, refer to the
PC Networking Tutorial on the
NETGEAR Dual Band Wireless
PC Card 32-bit CardBus
WAG511 Resource CD and the
Help information provided in the
Windows system you are using.
For assistance with setting up
printers in Windows, refer to the
Help and Support information
that comes with the version of
the Windows operating systems
you are using.
2-7