Setting Up Advanced Security - NETGEAR WAG511 - 802.11a/b/g Dual Band Wireless PC Card User Manual

NETGEAR Dual Band Wireless PC Card 32-bit CardBus WAG511 User Manual
5. Select Create with Passphrase and enter the passphrase. The configuration utility will
automatically generate the WEP keys.
Note: The characters are case sensitive. Be sure to use the same passphrase for all the
wireless devices in the network.
If the passphrase method is not available in the other devices, you must manually enter the
keys to match exactly what is in the access point and other 802.11b wireless devices.
6. To save your settings in a Profile, click Save Profile.
7. Click Apply, and then click Close to exit the utility.

Setting up Advanced Security

Advanced Security includes WPA/WPA2, WPA/WPA2-PSK, 802.1x, and Cisco LEAP.
To configure Advanced security:
1. Make sure the NETGEAR software is installed and the WAG511 Wireless PC Card is fully
inserted in the CardBus slot in your computer.
2. Use the icon to open the Smart Wireless Utility. The Settings tab page opens.
3. Enter the profile and Network Name (SSID).
Note: You will not get a wireless network connection unless the SSID that you enter
exactly matches the SSID used by the access point
v4.0, March 2007
2-11