Wpa-Psk Security Settings Worksheet; How To Configure Wpa-Psk Advanced Security - NETGEAR WAG511 User Manual

User's Manual for the NETGEAR Dual Band Wireless PC Card 32-bit CardBus WAG511
A WPA enabled wireless access point.
2.
Fill in the worksheet and use the procedure below to configure WPA-PSK settings.

WPA-PSK Security Settings Worksheet

Print this form, fill in the configuration parameters and put it in a safe place for possible future
reference. For an existing wireless network, the person who set up the network will be able to
provide this information.
• Wireless Network Name (SSID)
The Service Set Identification (SSID) identifies the wireless local area network.
Note Some wireless access points will not broadcast their SSID as a security feature. In such
:
a case, you will need to get the SSID from the wireless network administrator.
Wireless network name (SSID): ______________________________
• Passphrase (Pre-Shared Key): ________________________________________

How to Configure WPA-PSK Advanced Security

Follow the steps below to configure WPA-PSK Advanced Security.
1. Run the WAG511 Smart Wireless Wizard.
Make sure the WAG511 software is installed and the WAG511 is fully inserted in your PC.
a.
Open the configuration utility by clicking on the WAG511 icon
b.
desktop or in the system tray. The Settings tab page opens.
2. Configure the Network Name (SSID) settings.
Enter the SSID. This is also called the Wireless Network Name.
Tip: Click the Networks tab to view a list of the available wireless networks and their SSIDs.
Configure the WPA-PSK Advanced settings.
3.
Under Security, select the Advanced radio button then click Advanced Security.
a.
5-10
202-10041-01 September 2004
on the Windows
Wireless Security Configuration