Upper Steering Shaft Removal; Steering Wheel Removal - Polaris RZR XP Turbo Service Manual

UPPER STEERING SHAFT REMOVAL

1. Remove the two Torx fasteners
plastic cover and remove the cover from the vehicle.
2. Remove the pinch bolt retaining the upper steering
shaft to the power steering unit.
3. Lift the steering wheel up and remove the fasteners
t
that retain the steering column.
9928491 R04 - 2017-2018 RZR XP Turbo / XP4 Turbo Service Manual
© Copyright Polaris Industries Inc.
4. Remove the steering shaft, steering column and
steering wheel from the vehicle as an assembly.
q
retaining the black
5. If replacing the upper steering shaft or steering wheel,
refer to Steering Wheel Removal, page 8.5.

STEERING WHEEL REMOVAL

1. Remove the upper steering shaft, pivot tube and
steering wheel as an assembly before attempting to
remove the steering wheel. Refer to Upper Steering
Shaft Removal, page 8.5.
installed in the vehicle can permanently damage the
2. Remove the steering wheel cap.
3. Loosen the nut and back it half way off the steering
shaft.
4. Place the assembly in a vise.
STEERING / SUSPENSION
CAUTION
Striking the steering wheel or steering shaft while
EPS unit and cause a Power Steering Fault.
8
8.5