Polaris RZR XP Turbo Service Manual page 171

y
11. Install the eight M10 , two M8
lower crankcase bolts. Tighten all bolts lightly by
hand.
NOTE
Install new M10 lower crankcase bolts.
12. Torque lower crankcase bolts in sequence to
specification. Repeat sequence to verify final torque.
TORQUE
Lower Crankcase Bolts:
M10 Bolts:
Step 1: 9 ft-lb (12 Nm)
Step 2: 21 ft-lb (28 Nm)
Step 3: Tighten add'n 90°
M8 Bolts:
26 ft-lb (35 Nm)
M6 Bolts:
9 ft-lb (12 Nm)
13. Rotate the engine so the cylinder is facing up.
9928491 R04 - 2017-2018 RZR XP Turbo / XP4 Turbo Service Manual
© Copyright Polaris Industries Inc.
u i
and one M6 14. Install the eleven M6
crankcase bolts. Tighten all bolts lightly by hand.
15. Torque the upper crankcase bolts in sequence to
specification. Repeat the sequence to verify final
torque.
16. Rotate the engine so the cylinder is facing down.
17. Install a new seal on the oil pump.
18. Lift the oil pump drive chain and install the oil pump.
ENGINE / COOLING SYSTEM
o
and two M8
TORQUE
Upper Crankcase Bolts:
M8 Bolts:
26 ft-lb (35 Nm)
M6 Bolts:
9 ft-lb (12 Nm)
i
upper
3
3.79