FINAL DRIVE
PROP SHAFT
PROP SHAFT REMOVAL (XP)
1. If removing the front prop shaft, Locate the prop
q
shaft roll pin
and use the Roll Pin Removal Tool to
remove the roll pin. Discard roll pin. Push the front
prop shaft rearward to remove it from the front
gearcase input shaft.
Roll Pin Removal Tool:
2872608
Right front wheel can be removed to gain better access
to the prop shaft roll pin.
2. Remove the fasteners
plate.
3. Remove the seats.
7.20
NOTE
w
retaining the front skid
4. Remove push rivets
retaining the center console. Push the rubber boots
around the seat belt buckles and the shifter through
the center console to remove the console.
5. Remove the two fasteners
bearing isolator.
9928491 R04 - 2017-2018 RZR XP Turbo / XP4 Turbo Service Manual
e
and the torx screws
t
retaining the prop shaft
© Copyright Polaris Industries Inc.
r