026:Distance From The Standby Position Of Cis To The Shading Start Point; 041: Vertical Scan Start Position Adjustment (When Scanning On A Document Fed From Adf); 042: Horizontal Scan Start Position Adjustment (When Scanning On A Document Fed From Adf); 044: Horizontal Scan End Position Correction (Superfine:scanning On Adf) - Canon LASER CLASS 810 Service Manual

No.
041:
042:
043:
044:
045:
046:
047:
048:
049: - 053:
054:
055: - 082:
083:
083: - 099:
100:
101: - 192:
193:
194:
195:
196: - 212:
213:
214:
215:
216:-350:
If any operation error occurs after changing the setting value, change the setting value to the original one.
16.6.2 <026:Distance from the standby position of CIS to the shading start point>
White shading can be adjusted finely.
Normally, do not change the setting value. If any operation error occurs after changing the setting value, change the setting value to the original one.
16.6.3 <041: Vertical scan start position adjustment (when scanning on a document fed from ADF)>
Adjust the position at which vertical scanning of a document fed from the ADF starts. The larger the adjustment value, the narrower the left-side margin of the
image becomes.
16.6.4 <042: Horizontal scan start position adjustment (when scanning on a document fed from ADF)>
Adjust the position at which horizontal scanning of a document fed from the ADF starts. The larger the adjustment value, the narrower the top margin of the image
becomes.
16.6.5 <044: Horizontal scan end position correction (superfine:scanning on ADF)>
Adjust the position at which horizontal scanning of a FAX document scanned in superfine mode ends. The larger the adjustment value, the narrower the bottom
margin of the image becomes.
16.6.6 <045: Horizontal scan end position correction (fine:scanning on ADF)>
Adjust the position at which horizontal scanning of a FAX document scanned in fine mode ends. The larger the adjustment value, the narrower the bottom margin
of the image becomes.
Function
Vertical scan start position adjustment (scanning on ADF)
Horizontal scan start position adjustment (scanning on ADF)
Horizontal scan end position correction (copy:scanning on ADF)
Horizontal scan end position correction (superfine:scanning on ADF)
Horizontal scan end position correction (fine:scanning on ADF)
Horizontal scan end position correction (standard:scanning on ADF)
Vertical scan magnification correction (scanning on ADF)
Horizontal scan magnification correction (scanning on ADF)
Not used
Pickup motor speed correction (when the ADF is used)
Not used
To support the longer size original (1000mm)
Not used
Adjustment of the registration loop volume (ADF)
Not used
ADF special paper, standardized size: LGL misidentification-ready
ADF special paper, standardized size: LTR misidentification-ready
ADF special paper, standardized size: LTR_R misidentification-ready 0
Not used
XYZ correction value (X) of standard white plate
XYZ correction value (Y) of standard white plate
XYZ correction value (Z) of standard white plate
Not used
Default Setting range Unit
0 (CIS fix 0-70 one unit=0.1mm
type)
35 (CIS
shift type)
241 171-311 one unit=0.1mm
45 0-200 one unit=0.1mm
65 0-200 one unit=0.1mm
80 0-200 one unit=0.1mm
80 0-200 one unit=0.1mm
16 0-32 one unit=0.1%
16 0-32 one unit=0.1%
16 0-32 one unit=0.1%
6500 6500, 10200
166 126-206 one unit=0.1mm
0 0 : LEGAL
1 : FOOLSCAP
2 : M_OFFICIO
3 :
A_FOOLSCAP
4 : FOLIO
5 : G_LEGAL
6 : A_OFFICIO
7 : B_OFFICIO
0 0 : LTR
1 : G_LTR
2 : A_LTR
0 : LTR_R
1 : FOOLSCAP
2 : OFFICIO
3 : E_OFFICIO
4 : G_LTR_R
5 : A_LTR_R
8273 1-9999
8737 1-9999
9427 1-9999
Chapter 16
0016-7945
0016-7947
0016-7948
0016-7950
0016-7951
16-23