Optional modules
Resetting the load
display to zero
56
Operating data module
Module
: 21.02.2020
Total data
: 12.07.2020
Module
With the
menu option, the Total data and the Programme
data will be deleted from the Operating data.
Total data
With the
menu option, only the Total data will be deleted
from the Operating data.
Programme data
With the
be deleted from the Operating data.
Rotate the rotary control to select one of the menu options and
press the rotary control to confirm the selection.
A prompt to enter a password then appears.
Password:
ABCDEFGHIJKLMNOPQRSTUVWXYZ
0123456789
Enter the password or insert the card for supervisor level.
The menu option is accessed and an additional security question ap-
pears.
Delete operating data?
Press the "Save" button.
The data is deleted.
Weighing system/weighing plinth
If the machine is equipped with a weighing plinth, the load weight is
displayed in 0.2 kg increments during loading. The maximum load
weight for the selected programme is displayed beside it.
Do not place any items on the machine. Do not lean against the
machine.
This can influence the result of the measurement.
If the load display does not show "
display to 0 using the button.
Delete data
menu option, only the Programme data will
0.0
" with an empty drum, set the