Scanning Originals Applied With Auto Focus - Microtek Bio-5050 User Manual

Scanning Originals Applied with Auto Focus

Auto Focus allows the scanner to change the focus position on images through
the movement of the CCD, resulting in better image quality for a chosen area of
the scan. You can either take the result which is the area applied with the Auto
Focus function is decided and selected by the software system automatically, or
assign a specific area of the scan frame applied with the Auto Focus function by
yourself.
By default, the Auto Focus function is activated, and the Focus tool button on
the toolbar will be enabled displayed with an enabled icon (
function is not activated, the Focus tool button will be grayed out ( ). To enable
auto focus, go to the Preference menu and to select the More command, and
then check the "Auto Focus" to enable it.
1. Follow steps 1 to 2 in the previous scanning scenarios to place your scan
2. Click the Overview button to perform a preliminary scan of the image.
26 Bio-5050 Scanner User's Manual
material, and to launch ScanWizard Bio.
If this is the first time to scan your scan material, you can see a flashing
frame (enclosed by dotted lines) together with a default Auto Focus target
sign ( ) appearing on the preview area. The Auto Focus target sign marks
the area where the Auto Focus is applied to.
). If the Auto Focus
Focus on an
automatically
selected area by
system
Scan frame
(enclosed by
dotted lines)