Table of Contents
Advertisement
Periodically Scanning Electrophoresis Gels/
Films
1. Refer to the previous chapter
2. Launch ScanWizard Bio either as a stand-
3. Follow the procedure (steps 3 through 8) for "Scanning Electrophoretic Gels/
4. If necessary, you can create as many scan jobs with different settings as you
5. Click the Periodic Scan button in the Preview window to start scanning.
Enter the time
interval between
scans
Enter the number of
times to be run
Specify a location
where the scanned
images are saved
Enter a prefix for the
name of the files.
"Image" is the default.
Select the file format
in which to save the
scanned images
22
Bio-5050 Scanner User's Manual
"Positioning Materials" to insert the
Leak-Free Glass Holder with loaded gel
or film into the transparency bay (lower
scan bed) of the scanner.
Make sure that nothing is on the
scanner's glass surface (upper scan bed).
alone by clicking on the program icon on
the desktop.
Films" section to specify the scanning settings for the image.
wish.
a)
Click the NEW or DUP button in the Scan Job Queue window to create
more scan jobs.
b)
For each scan job, specify its own scan settings in the Settings window.
After the button is pressed, you will be prompted to set the relevant
parameter settings for periodic scanning. In the dialog box that opens, first
set the time interval and the number of times to be run, and then specify the
file attributes for the scanned images. Finally, click the Start button to start
scanning. When done, all your scanned images will be individually named
and archived in your specified location according to the scanning order.
If checked,
each time a
periodic scan
is performed,
a subfolder
named with the
current date
and time will be
automatically
created under
the location you
specify.
Advertisement
Table of Contents
