Table of Contents
Advertisement
Positioning Materials
Proper positioning of the scan material on the scanner is important for
successful scanning. Before starting scanning, refer to the individual section in
the succeeding pages about how to correctly position the electrophoresis gels,
transparent films, and reflective materials.
Positioning Electrophoresis Gels/Films
This procedure applies when you use the lower scan bed of the Bio-5050 to scan
the electrophoresis gels or transparent films.
There are two pieces of Leak-Free Glass Holders come with your scanner
package, which are specifically designed for scanning electrophoresis gels and
transparent films. After unpacking, check to see if the holders are included in the
box. If the holders are missing, please contact Microtek Customer Service.
1. Take the Leak-Free Glass Holder out from the box, and turn the side of the
2. Place the electrophoresis gel or film to be scanned on the glass surface of
16
Bio-5050 Scanner User's Manual
holder with a sticker facing up.
the holder.
The side of the holder labeled with
a sticker should be facing up.
Keep Calibration strip clear
and free of any obstruction
Advertisement
Table of Contents
