Scanning Documents With Barcodes - Microtek ArtixScanDI 2015c User Manual

Scanning Documents with Barcodes

This scanning scenario is useful for the documents to be filed with barcode
numbers.
1. Place the document to be scanned on either the scanner's glass surface or
2. Launch ScanWizard DI as a stand-alone program by clicking on the
3. Click the Scan Setup button in the interface to activate the Scan Setup
4. Follow the procedure (steps 4 through 8) for "Scanning Documents" section
5. Click the OK button to close the Scan Setup interface and return to the Main
6. In the Main interface, click the File Format menu button to select a file
7. In the Main interface, click the File Name menu
8. In the Main interface, select and click the Normal Scan button to start
9. Click the Open Folder button to locate the scanned images if you want to
22 ArtixScan DI 2015c User's Manual
onto the scanner's document feed tray.
ScanWizard DI icon on the desktop.
interface.
to specify your scanning requirements in the interface.
interface of ScanWizard DI.
format for the scanned images.
button and then select "Barcode+Suffix" from
its drop-down menu for the scanned images.
Note: If you want to know more about how
to deal with documents with barcodes, refer
to the ScanWizard DI Reference Manual in the
Microtek Software CD/DVD.
scanning.
When done, the scanned images will be automatically saved into the folder
defined in the File Location menu box. At the same time, the scanned
images will be displayed in thumbnail sizes in the Thumbnail View window
and labeled with detected barcode values and chosen file format.
view.