Table of Contents
Advertisement
Scanning Reflective Originals
1. Refer to the previous chapter
2. Launch ScanWizard Bio either as a
3. Go to the Preview window of
4. Click the Overview button to perform a preliminary scan of the image, which
5. Select the Scan Frame (Frame) tool from the Toolbar in the Preview window,
6. Click the Prescan button to display a detailed image area selected via the
7. Specify your scanning requirements in the Settings window.
8.
9. Click the Scan to button in the Preview window to start scanning.
24
Bio-5050 Scanner User's Manual
"Positioning Materials" to place the
reflective original to be scanned on the
glass surface (upper scan bed) of the
scanner.
stand-alone by clicking on the program
icon on the desktop.
ScanWizard Bio, and choose Reflective
from the Scan Material (Material) menu.
will appear in the Preview window.
and choose the area to be scanned by dragging a rectangle around it. You
will see a flashing frame (marquee) around the selected area.
Scan Frame tool. A thumbnail of the image appears as well in the Scan Job
Queue window.
a)
Select a desired image type.
b)
Select a desired resolution.
c)
Adjust the scan frame settings if necessary.
Adjust image quality if necessary, using the Advanced Image Correction
(AIC) tools.
Available AIC tools vary depending on the setting of scan material and image
type.
If ScanWizard Bio was launched in stand-alone mode, you will be prompted
to specify the file attributes for the scanned image after the Scan to button
is pressed, such as entering the file name, specifying a folder name of your
own, etc. When you have completed the settings, press the Save button,
and the scanner will automatically scan and save your image based on your
settings.
Advertisement
Table of Contents
