Table of Contents
Advertisement
If necessary, secure the transparent film to the glass surface using the Vinyl
strips included in the box when you position the film on the holder.
Vinyl strip
3. Insert the holder with loaded electrophoresis gel or film all the way into the
transparency bay (lower scan bed) of the scanner.
NOTE:
•
Make sure the correct side of the Leak-Free Glass Holder is facing up when
you insert it into the scanner's transparency bay (lower scan bed). The
correct side of the holder is labeled with a sticker on it.
•
Make sure that the Calibration strip on the holder is kept clear and free of
obstruction at all times; no material should ever be placed on this area.
•
Please take note that the high temperature may cause damage to your
electrophoresis gels and transparent films. Therefore, turn off the scanner
and remove the scanned gels and films from the scanner once you finish the
scanning job.
•
The Leak-Free Glass Holder requires regular cleaning. To clean, use a mild
glass cleaning solution, and wipe the glass plate gently with a lint-free, lens-
cleaning cloth to prevent leaving fiber residue.
Electrophoresis film
Keep Calibration strip clear
and free of any obstruction
Bio-5050 Scanner User's Manual
17
Advertisement
Table of Contents
