Scanning And Auto-Cropping Multiple Pictures - Microtek XT7000 HS User Manual

Scanning and Auto-Cropping Multiple Pictures

This scanning scenario guides users to crop and extract multiple pictures from
one scan automatically, saving extra time from document scanning
1. Place the multiple originals to be scanned facing down on the scanner's glass
2. Launch ScanWizard DI as a stand-alone program by clicking on the
3. Follow the procedure (steps 3 through 13) for "Scanning Documents" section
28 XT7000 HS Scanner User's Manual
surface.
ScanWizard DI icon on the desktop.
to specify your scanning requirements.
In step 6, click the Preview button to perform a preliminary view of the
–
entire scan area.
When done, a preview image containing multiple pictures appears in the
Preview window.
– In step 7, check the "Multiple Auto-Crop" in the General panel.
When checked, the Auto Crop option will be automatically checked if it
is not already checked.
– In step 12, click the Normal Scan button to perform a final scan.
When done, the system will crop pictures individually according to
the original size of each picture from one scan and save them into the
specified folder. At the same time, the individual image thumbnail will
also be displayed in the Thumbnail View window.
NOTE: Please ensure that there
is space between the scanned
originals when they are placed
on the scanner's glass surface;
otherwise, the individual image
may not be extracted from
one scan correctly after auto-
cropping.