Scanning The Materials; Positioning The Materials - Microtek LS-4600 User Manual

Scanning the Materials

Positioning the Materials

1. Place the material to be scanned face down on the scan bed (scanner glass
2. If the scanned material is folded or creased, put numbers of movable press
14 LS-4600 User's Manual
surface), towards the right of the scanner. Center the top of the original
along the ruler on the scanner.
plates (optional, not standard accessories) in needs at the top of the material
to make it flat.
When positioning movable press plates on the scan bed,
a) hand on movable press plates with both of your hands;
b) then; watch out for the scanner glass surface and put them down
gently.
Ruler
Movable press plates
(optional)