The Router's Front Panel - NETGEAR RP114 Reference Manual

The Router's Front Panel

The front panel of the Model RP114 Web Safe Router
status LEDs.
Figure 2-1. RP114 Front Panel
You can use some of the LEDs to verify connections.
the front panel of the router. These LEDs are green when lit.
Table 2-1. LED Descriptions
Label
PWR (Power)
TEST
WAN
LNK
ACT (Activity)
LAN
LNK/ACT
(Link/Activity)
100 (100 Mbps)
Setting Up the Hardware
Reference Guide for the Model RP114 Web Safe Router
Activity Description
On Power is supplied to the router.
Off Power is not supplied to the router.
On The system is not ready or has failed to start up.
Off The system is ready and running.
Blinking The system is initializing.
On The WAN port has detected a link with an attached device.
Blinking Data is being transmitted or received by the WAN port.
On The LAN port has detected a link with an attached device.
Blinking Data is being tranmitted or received by the LAN port.
On The LAN is operating at 100 Mbps.
Off The LAN is operating at 10 Mbps.
(Figure 2-1) contains port connections and
Table 2-1 lists and describes each LED on
2-3