NETGEAR RP114 Reference Manual page 97

ras> ip rout stat
Dest FF Len Interface
192.168.0.0 00 24
default 00 0
ras>
Figure 8-7. IP Static Routing Table Example
In this example, the first route shown is the local Ethernet subnet connected to the LAN
interface (enif0). The second route is the default route, through the WAN interface (enif1). All
traffic from the LAN to a destination outside the LAN will be sent to the default route and will
be handled by the ISP.
After viewing the table, type "exit" to return to the menus.
5.
To create additional static routes for IP:
In the Manager interface, open Menu 12 - IP Static Route Setup.
1.
Select an unused number from the menu and press [Enter].
2.
Menu 12.1 - Edit IP Static Route opens as shown in
Using the Manager Interface to Configure the Router for Internet Access
Reference Guide for the Model RP114 Web Safe Router
Gateway
enif0 192.168.0.1
enif1 10.118.18.1
Metric stat Timer Use
1 041b 0 0
1 001b 0 0
Figure 8-8.
8-13