NETGEAR RP114 Reference Manual page 89

Table 8-1. Remote Node Profile Fields (continued)
Field
Encapsulation
Service Type
Service Name
Outgoing:
My Login Name
My Password
Server IP
Edit IP Options
Session Options:
Edit Filter Sets
Using the Manager Interface to Configure the Router for Internet Access
Reference Guide for the Model RP114 Web Safe Router
Description
Choose from Ethernet, PPPoE, or PPTP.
If your service provider does not require a login program, leave Encapsulation as
Ethernet.
If your service provider uses PPP over Ethernet (PPPoE), select Encapsulation as
PPPoE, and enter these additional parameters:
• Enter the PPPoE login user name and password provided by your ISP. These
fields are case sensitive.
European versions only: If your service provider uses Alcatel's ANT (ADSL
Network Termination) with PPTP as a login method, select Encapsulation as PPTP,
and enter these additional parameters:
• Enter the PPTP login user name and password provided by your ISP. These
fields are case sensitive.
Choose from Standard, RR-Toshiba (RoadRunner Toshiba authentication method)
or RR-Manager (RoadRunner Manager authentication method). Choose a
RoadRunner flavor if your ISP is Time Warner's RoadRunner; otherwise choose
Standard.
If your connection supports multiple ISPs, enter the the Connection ID/Name for
the one you use. Otherwise leave Service Name blank.
If your service provider requires a login program, enter the login name assigned to
your account.
If your service provider requires a login program, enter the password assigned to
your account.
If your service provider provided an authentication server address, enter it as
Server IP address.
This field edits the parameters of the TCP/IP protocol. Select Yes and press [Enter]
to display Menu 11.3 - Remote Node Network Layer Options. For more information
about configuring IP options, see
Select Yes and press [Enter] to display Menu 11.5, Remote Node Filter if you have
configured a filter in Menu 21 and wish to apply it as a Call Filter or Data filter for
the node. For more information about configuring filter options, see
Sets" on page 8-8.
"Editing IP Options" on page 8-6.
"Editing Filter
8-5