The Router's Front Panel - NETGEAR WGR614 v6 Reference Manual

Reference Manual for the 54 Mbps Wireless Router WGR614 v6

The Router's Front Panel

The front panel of the WGR614 v6 router contains the status lights described below.
Figure 2-1: WGR614 v6 Front Panel
You can use the status lights to verify connections. Viewed from left to right, the table below
describes the lights on the front panel of the router.
Table 2-1. Status Light Descriptions
Label Activity
Power On Amber Blinking
On Green Solid
Off
Solid Amber
Test On
Off
Wireless On
Off
Internet On
Blink
LAN On (Green)
Blink (Green)
On (Amber)
Blink (Amber)
Off
2-6
Description
Power is supplied to the router and it is performing its diagnostic test.
Power is supplied and the router it has passed its diagnostic test.
Power is not supplied to the router.
The router has failed its diagnostic test.
The unit is performing the power on self test diagnostic.
The unit successfully completed the power on self test diagnostic.
The Wireless port is initialized and the wireless feature is enabled.
The wireless feature is turned off or there is a problem.
The Internet port has detected a link with an attached device.
Data is being transmitted or received by the Internet port.
The LAN (local area network) port has detected link with a 100 Mbps
device.
Data is being transmitted or received at 100 Mbps.
The Local port has detected link with a 10 Mbps device.
Data is being transmitted or received at 10 Mbps.
No link is detected on this port.
June 2004 202-10036-01
Introduction