Local Web And Ftp Server Example - NETGEAR RP114 Reference Manual

1.Default
2. 0
3. 0
4. 0
5. 0
6. 0
7. 0
8. 0
Figure 8-6. Menu 15 - SUA Server Setup

Local Web and FTP Server Example

If a local PC, with a private address of 192.168.0.3, acts as a Web and FTP server, configure
Menu 15 to forward ports 80 (HTTP) and 21 (FTP) to local address 192.168.0.3 as shown in
Table 8-4.
Table 8-4. Menu 15 Field Entries (Example)
Port #
Default
80 (HTTP)
21 (FTP)
In order for a remote user to access this server from the Internet, the remote user must know the IP
address that has been assigned by your ISP. If this address is 172.16.1.23, for example, an Internet
user can access your Web server by directing the browser to http://172.16.1.23. The assigned IP
address can be found in Menu 24.1, in the WAN IP Address field.
Using the Manager Interface to Configure the Router for Internet Access
Menu 15 - Multiple Server Configuration
Port # IP Address
------ ---------------
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
IP Address
0.0.0.0
192.168.0.3
192.168.0.3
Reference Guide for the Model RP114 Web Safe Router
8-11