Polaris RZR 900 2015 Service Manual page 97

16. Apply Loctite® 204™ to the threads of the impeller
bolt. Install washer and impeller bolt and torque to
specification.
TORQUE
Water Pump Impeller Bolt:
7 ft-lb (10 Nm) (Apply Loctite® 204™ to bolt
threads)
17. Clean water pump cover and housing gasket
surfaces.
18. Install a new water pump cover gasket.
19. Install the water pump cover and three retaining bolts
i
. Torque bolts in sequence to specification.
TORQUE
Water Pump Cover Bolts:
7 ft-lb (10 Nm) (Apply Loctite® 204™ to bolt
threads)
20. Install two new water pump o-rings and lubricate
them with clean engine oil.
21. Install water pump assembly into the engine. (see
Chapter 3 – Water Pump Installation, page 3.21)
9926814 R08 -
Manual
© Copyright Polaris Industries Inc.
2015-2016 RZR 900
ENGINE / COOLING SYSTEM
2016 RZR S 1000 Service
3
3.19