Polaris RZR 900 2015 Service Manual page 428

STEERING / SUSPENSION
NOTE
When installing bleed shim, ensure the tab is lined up
with compression port.
28. Install rebound valve stack with required top out
washer.
29. Apply a thin layer of float fluid to the threads, nut, or
BOC post and torque to 22 ft-lbs (30 Nm).
30. Install BOC post valving.
9926814 R08 -
8.40
Ensure retaining ring is fully installed and secure.
31. Install BOC piston and retaining ring.
32. Apply Loctite® primer to the body cap threads.
33. Install appropriate O-ring and apply a thin layer of
shock oil to the O-ring ONLY.
2015-2016 RZR 900
NOTE
2016 RZR S 1000 Service
© Copyright Polaris Industries Inc.
Manual