BRAKE SYSTEM
FRONT BRAKE DISC RUNOUT
Mount dial indicator as shown to measure disc runout.
Slowly rotate the disc and read total runout on the dial
indicator.
Replace
the
specification.
MEASUREMENT
Brake Disc Runout:
Service Limit: 0.010" (0.254 mm)
9926814 R08 -
9.22
disc
if
runout
exceeds
2015-2016 RZR 900
FRONT DISC REPLACEMENT
1. Remove the front brake caliper (see Chapter 9 –
Front Caliper / Pad Removal, page 9.17).
2. Remove wheel hub cotter pin
w
washers
.
3. Remove the wheel hub assembly from the vehicle
and remove the four bolts
hub.
4. Clean the wheel hub mating surface and install new
disc on wheel hub.
5. Install new brake disc bolts
specification.
TORQUE
Brake Disc Mounting Bolts:
18 ft-lb (24 Nm)
CAUTION
Always use new brake disc mounting bolts. The bolts
have a pre-applied locking agent which is destroyed
upon removal.
r
e
, castle nut
and
q
retaining the disc to the
t
and torque to
2016 RZR S 1000 Service
Manual
© Copyright Polaris Industries Inc.