Download Print this page

Mercedes-Benz G-Class 2021 Owner's Manual page 417

Advertisement

414 Technical data
414
shown depends strongly on the driving style and
operating conditions. The actual range can there-
fore deviate from the range currently displayed in
the on-board computer. The information supplied
in the Owner's Manual regarding the reserve
quantity at the rst display warning and on the
minimum top-up quantity when the fuel tank is
empty is also to be understood as guide values.
Engine oil
Engine oil
N N o o t t es on engine oil
es on engine oil
Observe the notes on operating uids
(
page 408).
/
* N N O O TE TE Engine damage caused by an incor-
rect oil lter, incorrect oil or additives
Do not use engine oils or oil lters other
#
than those which meet the speci cations
necessary for the prescribed service
intervals.
Do not alter the engine oil or oil lter in
#
order to achieve longer change intervals
than prescribed.
Do not use additives.
#
Have the engine oil changed a er the
#
prescribed intervals.
Mercedes-Benz recommends that you have the oil
change carried out at a quali ed specialist work-
shop.
Only use engine oils approved by Mercedes-Benz.
P P e e tr trol engines:
ol engines: For certain countries, di erent
engine oils can be used in conjunction with
reduced maintenance intervals. Further informa-
tion on di erent engine oils can be obtained at a
quali ed specialist workshop.
Quality and capacity of engine oil
Quality and capacity of engine oil
MB-Freig
MB-Fr
eigabe or MB-
abe or MB-Approv
Approval al
P P e e tr trol engines
ol engines
MB-Fr
MB-Freig
G 500
MB-Freig
MB-Fr
eigabe or MB-
abe or MB-Approv
Approval al
Diesel engines
Diesel engines
MB-Fr
MB-Freig
G 350 d, G 400 d
* recommended for lowest possible fuel con-
sumption (lowest SAE viscosity class in each
case; observe possible restrictions of the
approved SAE viscosity classes)
To achieve the lowest possible fuel consumption,
it is recommended to use the engine oil speci ca-
tions marked in the table for the lowest SAE vis-
cosity class. Possible restrictions of the approved
SAE viscosity classes must be observed.
eigabe or MB-
abe or MB-
Approval al
Approv
229.52,
229.61*
eigabe or MB-
abe or MB-
Approval al
Approv
229.52,
229.61*

Advertisement

loading