Advertisement
On vehicles with the same front and rear wheel
size, you can interchange the wheels every
5,000 to 10,000 km, depending on the wear.
Ensure the direction of rotation is maintained for
the wheels.
Observe the instructions and safety notes on
"Changing a wheel" when doing so (
N N o o t t es on st
es on stor oring wheels
ing wheels
When storing wheels, observe the following notes:
A er removing wheels, store them in a cool,
R
dry and preferably dark place.
Protect the tyres from contact with oil, grease
R
or fuel.
V V ehicle t
ehicle tool kit ov
ool kit over erview
view
The vehicle tool kit contains:
vehicle tool bag with:
R
pump lever for jack
-
wheel spanner with T-piece
-
screwdriver (inserted in a pump lever)
-
dismantling tool for roof luggage rack
-
(inserted in a pump lever)
jack with adapter
R
The vehicle tool kit is located under the rear
bench seat (
/
page 397).
/
1
Vehicle tool bag
2
Jack
page 99).
Wheels and tyres 397
%
The jack weighs approximately 4.4 kg.
The maximum load capacity of the jack can
be found on the sticker a xed to the jack.
The jack is maintenance-free. If there is a
malfunction, please contact a quali ed spe-
cialist workshop.
Pr Prepar
eparing t
ing the v
he vehicle f
ehicle for a wheel c
or a wheel change
R R eq equir uirements:
ements:
The required tyre-change tool kit is available. If
R
your vehicle is not equipped with the tyre-
change tool kit, consult a quali ed specialist
workshop to nd out about suitable tools.
The vehicle is not on a slope.
R
The vehicle is on solid, non-slippery and level
R
ground.
Apply the electric parking brake manually.
#
Move the front wheels to the straight-ahead
#
position.
Shi the transmission to position j.
#
Switch o the vehicle.
#
Make sure that the vehicle cannot be started.
#
397
hange
Advertisement
