Advertisement
Assemble pump lever 1.
#
Place pump lever
1
with the recess on lower-
#
ing screw
2
on the jack.
Turn pump lever
1
clockwise as far as it will
#
go.
Lowering screw
2
is closed.
3
Adapter
T T o r
o raise t
aise the v
he vehicle at t
ehicle at the fr
he front
ont: : adapter
be secured on the jack.
T T o r
o raise t
aise the v
he vehicle at t
ehicle at the r
he rear
ear: : remove adapter
3
from the jack.
Important notes on using the jack:
Use only the vehicle-speci c jack that has
R
been tested and approved by Mercedes-Benz
to raise the vehicle.
The jack is only designed for raising and hold-
R
ing the vehicle for a short time while a wheel
is being changed and not for maintenance
work under the vehicle.
The jack must be placed on a rm, at and
R
non-slip surface. If necessary, use a large, at,
load-bearing, non-slip underlay.
Position the jack only at the jack support
R
point.
Rules of conduct when the vehicle is raised:
Never place your hands or feet under the vehi-
R
cle.
Never lie under the vehicle.
R
3
must
Do not start the vehicle and do not release the
R
electric parking brake.
Do not open or close any doors or the rear-
R
end door.
Wheels and tyres 399
Using the wheel wrench, loosen the wheel
#
bolts on the wheel you wish to change by
about one full turn. Do not unscrew the bolts
completely.
& W W ARNING
ARNING Risk of injury from incorrect
positioning of the jack
If you do not position the jack correctly at the
appropriate jacking point of the vehicle, the
jack could tip with the vehicle raised.
Only position the jack at the appropriate
#
jacking point of the vehicle. The base of
the jack must be positioned vertically
under the jacking point of the vehicle.
399
Advertisement
