Advertisement
402 Wheels and tyres
402
T T o low
o lower t
er the v
he vehicle:
ehicle: place the ratchet onto
#
the hexagon nut of the jack so that the letters
"AB" are visible and turn anti-clockwise.
Tighten the wheel bolts evenly in a diagonal
#
pattern in the order indicated
an initial maximum force of 80 Nm.
Tighten the wheel bolts evenly in a diagonal
#
pattern in the order indicated
the speci ed tightening torque of 150 Nm.
& W W ARNING
ARNING Risk of accident due to incor-
rect tightening torque
The wheels could come loose if the wheel
bolts or wheel nuts are not tightened to the
prescribed torque.
Ensure that the wheel bolts or wheel
#
nuts are tightened to the prescribed
tightening torque.
If you are not sure, do not move the vehi-
#
cle. Contact a quali ed specialist work-
shop and have the tightening torque
checked immediately.
Check the tyre pressure of the newly tted
#
1
to
5
with
wheel and adjust it if necessary.
%
The following does not apply if the new wheel
is an emergency spare wheel.
1
to
5
with
V V ehicles wit
ehicles with a tyr
#
t t em:
em: restart the tyre pressure monitoring sys-
tem (
/
h a tyre pr
e pressur
essure monit
e monitor oring sy
ing sys- s-
page 393).
Emerg
Emergency spar
ency spare wheel
e wheel
N N o o t t es on t
es on the emerg
he emergency spar
ency spare wheel
e wheel
& W W ARNING
ARNING Risk of accident caused by
incorrect wheel and tyre dimensions
The wheel or tyre size and the tyre type of the
emergency spare wheel or spare wheel and
the wheel to be replaced may di er. The emer-
gency spare wheel or spare wheel can signi -
cantly impair driving characteristics of the
vehicle.
To prevent hazardous situations:
Drive carefully.
#
Never t more than one emergency
#
spare wheel or spare wheel that di ers
in size.
Only use an emergency spare wheel or
#
spare wheel brie y.
Do not deactivate ESP
®
.
#
Have the emergency spare wheel or
#
spare wheel of a di erent size replaced
at the nearest quali ed specialist work-
Advertisement
