Advertisement
TAKE-UP REEL
SUPPLY REEL
SUPPLY SPINDLE
0
o)
•
0
0
0
0
0
TENSION
ADJUSTING
SPRING
SOUND DRUM
PULLEY PAWL
TAKE-UP PULLEY
N.
Film on TAKE-UP REEL is loose when the PROJECTOR operates in "REVERSE."
TAKE-UP PULLEY does not rotate freely.
PULLEY PAWL is dirty and does not have lubrication.
Clean and lubricate the BEARINGS; see Lubricants
and Adhesives, figure 43.
Clean and lubricate the PULLEY PAWL; See Lubricants
and Adhesives, figure 43.
SUPPLY REEL spills film when the PROJECTOR operates in "FORWARD."
SUPPLY SPINDLE torque is not correct.
Check for a torque of 35 to 99 mN•m (5 to 14 in oz). ir
the torque is not correct, install a new TENSION
ADJUSTING SPRING.
Film position on SOUND DRUM is not correct when the PROJECTOR operates in "REVERSE."
[
Adjustment of the DAMPER ROLLER ARM is not
correct.
See Adjustments, "DAMPER ROLLER ARM," figure 18.
FIGURE 33
SMP20A
C3
Advertisement
