Advertisement
SHUTTE R SHAFT BEARIN G
CLAW ASSEM BLY
I
I
II
O V
0
(re
II
•
SPRING
CAM FOLLOW ER
No steadine ss' of image
LOWER LOOP
PERFO RATION
The PULLDO WN CLAW clearanc e in the APERTU RE
PLATE is not correct.
PRESSU RE PAD force is not correct.
SIDE GUIDE force is not correct; SIDE GUIDES
do not move freely.
SPRING tension on CAM FOLLOW ER is not correct.
SHUTTE R SHAFT BEARIN G does not move freely.
See Adjustm ents, "PULLD OWN CLAW," figure 7.
See Adjustm ents, "PRESS URE PAD Force," figure 10.
See Adjustm ents, "SIDE GUIDE FORCE ," figure 8.
Check the tension and adjust.
Install a new SHUTTE R SHAFT BEARIN G.
PROJEC TOR does not have a LOWER LOOP and damage s film PERFOR ATIONS .
PULLDO WN CLAW clearanc e is not correct.
PRESSU RE PAD force is not correct.
Damage to CAM FOLLOW ER
FIGUR E 32
See Adjustm ents, "PULLD OWN CLAW," figure 7.
See Adjustm ents, "PRESS URE PAD Force," figure 10.
Install a new CLAW ASSEMB LY.
'See the glossary .
SMP20A
C2
Advertisement
