Kodak PAGEANT 250S Service Manual page 15

SPROCKET CLAMPS
UPPER SPROCKET
CLAMP
POST
ROLLERS
PLATE
4
/ ll
•(•,
0
®
LOWER SPROCKET CLAMP
FIGURE 12
PLATE
To check:
To check the clearance between the SPROCKET and the
UPPER SPROCKET CLAMP do the following:
O
O
Insert 2 sections of film between the SPROCKET
and the SPROCKET CLAMP.
Close the CLAMP and check that the ROLLERS
rotate.
Insert 3 sections of film between the SPROCKET
and the SPROCKET CLAMP.
O
Close the CLAMP and check that the ROLLERS do
not rotate.
To adjust:
O
Bend the POST on the PLATE to adjust the clear-
ance.
0
Check the LOWER SPROCKET CLAMP with the
same procedure.
O
To adjust, loosen the 2 SCREWS and move the
PLATE.
SMP2OA
A6