Advertisement
DAMPER ROLLER
WASHER
SHAFT
O
a
To adjust:
O
Bend the SHAFT up or down on this angle.
FIGURE 19
DAMPER ROLLER
0
To check:
Remove the SCREW and WASHER from the end of
the DAMPER ROLLER.
O
Insert processed' film in the PROJECTOR.
0
Check that the DAMPER ROLLER slowly moves off
the SHAFT in "FORWARD" and onto the SHAFT in
"REVERSE." If necessary, see step 4 to adjust.
'See the glossary.
SNIP 20A
B1
Advertisement
