Advertisement
IN-AND-OUT CAM
t
•
I
O
LOOP
PERFORATION
PROJECTOR does not have a lower LOOP and damages film PERFORATIONS.
Alignment of PRESSURE PAD RAILS with APERTURE
PLATE RAILS is not correct.
Adjustment of PRESSURE ROLLER and ARM
ASSEMBLY is not correct.
Damage to IN-AND-OUT CAM.
See Adjustments, "PRESSURE PAD RAILS," figure 9.
See Adjustments, "PRESSURE ROLLER Force
and Position," figures 13 and 14.
Install a new IN-AND-OUT CAM.
PROJECTOR breaks the splices,
Damage to splice
PRESSURE PAD force is too high.
SPROCKET CLAMP adjustment is not correct.
Use a new splice.
See Adjustments, "PRESSURE PAD Force" figure 10.
See Adjustments, "SPROCKET CLAMPS," figure 12.
'See the glossary.
FIGURE 30
SIIP20A
B12
Advertisement
