License Light Assembly Removal And Installation; Front Fog Light Assembly Removal And Installation (If Equipped); Front Fog Light Bulb Replacement (If Equipped) - Suzuki Grand Vitara 2011 Manual

License Light Assembly Removal and
Installation
Removal
1) Disconnect negative (–) cable at battery.
2) Disconnect coupler (1) from license light (2).
3) Push locking part to arrow direction, and then
remove license light (2).
2
2
Installation
Reverse removal procedure for installation.
Front Fog Light Assembly Removal and
Installation (If Equipped)
Removal
1) Disconnect negative (–) cable at battery.
2) Remove front bumper. Refer to "Front Bumper
Components in Section 9K".
3) Disconnect coupler (1) from fog light (2).
4) Remove fog light screws (3), and remove front fog
light assembly (2).
3
Installation
Reverse removal procedure for installation nothing the
following:
• After installing, adjust aiming referring to "Front Fog
Light Aiming Adjustment with Screen (If Equipped)".
S6JB0A9206016
1
2
I5JB0A920028-01
S6JB0A9206017
3
2
1
I4RS0A920019-01

Front Fog Light Bulb Replacement (If Equipped)

WARNING
!
• To avoid danger of being burned, don't
touch when the bulb is hot.
• Don't touch glass surface of bulb to avoid
deteriorate as the case may be unclear
when bulb light on at dirty condition.
1) Remove front bumper referring to "Front Bumper
Components in Section 9K".
2) Remove fog light bulb (1) as shown.
1
3) Replace fog light bulb and assemble all removed
parts.
Lighting Systems: 9B-26
S6JB0A9206018
I4RS0A920020-01