Siemens SIMATIC ET 200SP Manual page 32

Set output
Count direction of DQ function
Pulse duration
Substitute value for DQ0
Substitute value for DQ1
Hysteresis (in increments)
Measured variable
Update time of the measuring
function
Time base for velocity meas-
urement
Increments per unit
Explanation of parameters
You can find a detailed description of the parameters in function manual Counting,
Measurement and Position Detection in sections Basic parameters and Configuring the
High_Speed_Counter available for download on the Internet
(http://support.automation.siemens.com/WW/view/en/59709820).
TM Count 1x24V (6ES7138‑6AA01‑0BA0) technology module
Manual, 07/2019, A5E33002339-AD
4.1 Operating with "Counting and measurement" technology object
Parameter
•
•
•
•
•
•
•
•
•
•
0...500.0...6553.5 ms
•
•
•
•
0...255
•
•
•
0...10...25000 ms
•
•
•
•
•
1...65535
Value range
Between comparison value and high limit /
measured value >= comparison value
Between comparison value and low limit /
measured value <= comparison value
Between comparison value 0 and 1
Not between comparison value 0 and 1
At comparison value for a pulse duration
After set command from CPU until compari-
son value
Use by user program
Up
Down
In both directions
0
1
0
1
Frequency
Period
Velocity
1 ms
10 ms
100 ms
1 s
60 s
Configuring/address space
Scope
Channel
Channel
Channel
Channel
Channel
Channel
Channel
Channel
Channel
Channel
31