Siemens SIMATIC ET 200SP Manual page 30

The following parameter settings are possible in the technology object:
Table 4- 3
Signal type
Signal evaluation
for counter inputs
Invert direction
(counter inputs)
Filter frequency
for counter inputs
Sensor type
Reaction to signal N
Frequency of
synchronization
Frequency of Capture function
High counting limit
Start value
Counting low limit
TM Count 1x24V (6ES7138‑6AA01‑0BA0) technology module
Manual, 07/2019, A5E33002339-AD
4.1 Operating with "Counting and measurement" technology object
Configurable parameters and their default setting
Parameter
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
-2147483648...2147483647
-2147483648...0...2147483647
-2147483648...2147483647
Value range
Pulse (A)
Pulse (A) and direction (B)
Count up (A), count down (B)
Incremental encoder (A, B phase-shifted)
Incremental encoder (A, B, N)
Single
Double
Quadruple
Deactivated
Activated
100 Hz
200 Hz
500 Hz
1 kHz
2 kHz
5 kHz
10 kHz
20 kHz
50 kHz
100 kHz
200 kHz
Sourcing output
Sinking output
Push-pull (sinking and sourcing output)
No reaction to signal N
Synchronization at signal N
Capture at signal N
Once
Periodic
Once
Periodic
Configuring/address space
Scope
Channel
Channel
Channel
Channel
Channel
Channel
Channel
Channel
Channel
Channel
Channel
29