Siemens SIMATIC ET 200SP Manual page 106

Error code in STATUS parame-
ter (hexadecimal)
Byte 0 Byte 1 Byte 2 Byte 3
DF 80 E1 3A
DF 80 E1 F0
Only for "Counting" operating mode
1
Only for "Position input for technology object "Motion Control"" operating mode
2
Only for DQ1 functions "Between comparison value 0 and 1" and "Not between comparison value 0 and 1"
3
Only for operating mode "Fast Mode"
4
Not for DQm function "Use by user program" or "Digital output without function"
5
TM Count 1x24V (6ES7138‑6AA01‑0BA0) technology module
Manual, 07/2019, A5E33002339-AD
Meaning
"Count direction for synchronization" parameter
4
invalid
Reserved bit is not set to 0.
Parameter data record
A.2 Parameter validation error
Remedy
Enter valid parameter value.
Set reserved bit to 0.
105