Siemens RDG20 KN Series Basic Documentation page 147

Notes
Humidity parameters
A6V11545892_en--_c
3 Plant type (application), Control Sequence and other control parameters
([Pxx] description) can be downloaded.
For more details on control parameters, see Control parameters [➙ 135].
●
ETS version 4 or higher is used to assign communication objects to group
addresses (S-Mode)
●
ETS version 4 or higher is used to download the application and parameters
1 Select Room relative humidity in the left pane to display humidity
parameters.
2 Adjust the parameters as needed. See Control parameters [➙ 135] for
more details on control parameters.
3 Select as group object in checkbox Humidity setpoints, to display the S-
Mode humidity setpoint in the Group Objects tab as follows:
Supported KNX tools
ETS
147 | 180
5