Siemens RDG20 KN Series Basic Documentation page 118

Functions
4
KNX communications
M/S - manager/subordinate binding via communication objects
4 The M/S - manager/subordinate binding is set using communication objects, for object details, see
Manager/subordinate communication in KNX S-Mode [➙ 67].
S-Mode objects manager
Setpoint:
90]
[91]
[27]
Room temperature: [37]
Room humidity: [77]
Operation mode: [17]
ChangeOverWater: [95]
Fan speed: [97]
[51]
● Binding setting on manager
● Binding setting on subordinate
118 | 180
Room temp: Current cooling setpoint
(send)
Room temp: Current heating setpoint
(send)
Room temp: Comfort setpoint abs (send)
Built-in room temperature value
Built-in room relative humidity value
[%r.h.]
Room operating mode: Status
ChangeOverWater status
Manual fan command value (send)
FanStatus
S-Mode objects subordinate
[93] Room temp: Current cooling setpoint
(receive)
[92] Room temp: Current heating setpoint
(receive)
Room temp: Comfort setpoint abs (receive)
[26]
[36] External room temperature value
[78] External room relative humidity value [% r.h.]
[94] Room operating mode: Status (receive)
[96] ChangeOverWater status
[52] Fan command value
[50] FanManual
A6V11545892_en--_c