Siemens RDG20 KN Series Basic Documentation page 139

Name
Service level
P024 Humidity setpoint high
4)
P026 Humidity setpoint low
4)
P027 Electric heater when cooling
3)
P028 Keypad
4)
P029 Fan: Dead zone Comfort mode
P030 Buzzer function
P031 Language
P032 Room operating mode holidays
4)
A6V11545892_en--_c
50
---
ON
0
2)
0
ON
1
0
Note:
1)
P001 cannot be set to 3 if P002 is set to 3, and vice versa.
2) If P350 = 0, P003 is disabled. P029 is invisible.
3) Only available when application is 2-pipe with electric heater
4)
If P258 = 0 (Subordinate), the parameter values are not available.
5) These parameters values are valid for RDG204KN and RDG264KN.
6) Time of day cannot be set via ETS, see Scheduler [➙ 62].
--- (0), P026 or 20...90 %
--- (0), 20...90 % or P024
ON: Enabled
OFF: Disabled
0 = Unlocked
1 = Auto lock
2 = Manual lock
3 = Auto lock the operating mode
4 = Auto lock the Setpoint shift
5 = Auto lock fan speed
6 = Auto lock operating mode, setpoint shift
7 = Auto lock operating mode, fan speed
8 = Auto lock fan speed, setpoint shift
9 = Auto lock scheduler
10 = Auto lock operating mode, scheduler
11 = Auto lock scheduler, fan speed
12 = Auto lock operating mode, scheduler, fan
speed
13 = Auto lock scheduler, setpoint shift
14 = Auto lock operating mode, scheduler,
setpoint shift
15 = Auto lock scheduler, fan speed, setpoint
shift
0 = Fan disable
1 = Low speed (Heating and Cooling)
2 = Low speed (Cooling only)
3 = Fan disable Auto & Manual
4 = Low speed Auto & Manual
5 = Low speed Auto & Manual Cooling
ON = Enabled
OFF = Disabled
1 = English
2 = Francais (French)
3 = Deutsch (German)
4 = Italiano (Italian)
5 = Espanol (Spanish)
6 = Nederlands (Dutch)
7 = Turkce (Turkish)
8 = Cesky (Czech)
9 = Suomi (Finnish)
10 = Polski (Polish)
11 = Magyar (Hungarian)
12 = Slovenski (Slovak)
13 = (Limba) Romana (Romanian)
14 = Dansk (Danish)
15 = Norsk (Norwegian)
0 = Economy
1 = Protection
Functions
4
Control parameters
M M P450,
P258
M M P450,
P258
✓ ✓ Appl
M M P258
P350
✓ ✓
‒
✓ ✓
‒
✓ ✓
M M P005,
P258
139 | 180