Siemens RDG20 KN Series Basic Documentation page 12

Overview
2
Functions
KNX communication
features
12 | 180
●
KNX bus (terminals CE+ and CE-) for communication with Synco devices or
KNX compatible devices
●
M/S - manager/subordinate function via LTE-Mode or S-Mode to synchronize
equipment and save energy in open spaces
●
M/S - manager/subordinate alarm management via LTE-Mode allowing for
subordinate alarm display on the manager
●
Display of outside temperature, humidity, CO
●
Time scheduling and central control of setpoints from KNX bus
●
Control of Economy setpoints via KNX bus
●
Relative humidity setpoint via KNX bus
●
Control of KNX actuators and fan via S-Mode objects
●
Energy supply optimization via energy demand signal via Synco RMB795B
central control unit
●
Interworking with Siemens AQR.. and QMX.. sensors for room humidity, room
temperature and CO
●
Interworking with Siemens QMX.. room operator units for room humidity, room
temperature and operating commands for fan, operating mode and setpoints
●
Commissioning KNX area, line and device address via mobile application PCT
Go
measurement
2
or time of day from KNX bus
2,
A6V11545892_en--_c